China wholesaler Cheap Hydraulic 27ton Gasoline/Pto Wood Firewood Processor with Saw and Splitting comer pto shaft

Product Description

cheap hydraulic 27ton Gasoline/pto  wood Firewood Processor with saw and splitting

RM7-12 firewood machine is excellent for professional use but also offers a unique option for demanding domestic use or as a shared machine when making larger amounts of firewood. Even though the machine only needs 10hp of power and weighs just 1600lbs, it can be used effectively to split trunks 14.5 inches thick. This exceptional power is best exhibited when making firewood out of trunks of varying sizes.Automatic infeed and outfeed conveyors. 
We have sold these for over 15 years and exported them directly to European market with better prices. 

PTO                                                                             GASOLINE

Gasoline powered:

  RM7-12 RM7-20
Power 188F CZPT Gasoline engine 188F CZPT Gasoline engine
Weight 520kg 520kg
Max. log diameter 38cm 38cm
Max.log length 55cm 55cm
(61cm for Canada and America market)
Saw motor with bearing 36L/min, 4800rpm 36L/min, 4800rpm
Chain saw 18inch (Original STIHL) 18inch (Original STIHL)
Cylinder Bore 3.2inch 4inch
Cycle time 7second 8second
Wheel 12inch high speed trailer wheel 12inch high speed trailer wheel
Knife 4ways (Optional  6 ways) 4ways (Optional  6 ways)
Packing 1pc/ iron pallet 1pc/ iron pallet
40″HC Container 24pcs 24pcs


Model: RM7-12P RM7-20P
Power PTO
Weight 520kg
Max. log diameter 38cm 38cm
Max.log length 55cm 55cm                                                   (61cm for Canada and America market)
Saw motor with bearing 36L/min, 4800rpm
Chain saw 18inch (Original STIHL) 18inch (Original STIHL)
Cylinder Bore 3.2inch 4inch
Cycle time 7second 8second
PTO Shaft 6 teeth, 1 3/8″
Knife 4ways (Optional  6 ways)

>>Products Details

1. splitting capacity: 4/6 wedge blade, optional

2. 1.5m hydraulic feeding

3. 3.2m firewood conveyor

4. autimatical input and output the wood.

5.TUV CE approved

Hydraulic Feeding (optional)

Original: China
Hydraulic feeding is used to move the log to the platform of firewood processor. It is driven by hydraulic system.
It is 1 of RM series wood processor optional parts. 
Very easy for installation.

New CE Type

In June 2018, Europe began to implement new CE standards, and we took the lead in obtaining CE certification in mainland China.

New CE standards requires that when you work, you must use both of your hands to avoid unnecessary damage caused by mistakes.


Wedge:4-way wedge (optional:6-way wedge)
Cut 33cm diameter logs and up to 53cm in length,
The 7 ton ram splits the wood against the standard 4 way splitter (cuts wood into 4 pieces) before CZPT the 3.2meter length long conveyor system.

Gasoline Engine

Brand: 188F CZPT Gasoline engine (optional: 14HP KOHLER Gasoline engine)

We have 3 power types: gasoline engine, electric motor, and PTO.

According to your requirement, we choose different power type.

conveyor  (optional)

Conveyor is 3.2meter long, 150mm belt width, with winch.
RM7-7 is available with the conveyor belt. The conveyor can move the cut wood to a fixed position on the ground.

>>Work Shop

01 Are you factory or trading company?
A) We are ISO9001 certified factory, mainly manufacture in Forestry & Farm Machinery.
B) Using “Self-produced Self-marketing” business, reducing the cost of intermediate links.
02 What’s your company advantages?
A) As the leading manufacturer of forest machines, we have exported to European market for more than 10 years, familiar with forest and farm market and can recommend to clients right products.
B) We have various products and can offer all the machines and tools in the forest and farm. You can get all the items you need. Easy and convenient for you.
C) With us your money and your business is safe. We can offer 7-days refund in case of bad quality
D) Coming together is a beginning; keeping together is progress; working together is success.
03 Can we buy 1 sample?
Yes, we need to add sample fee to the price and will return it back to your after receiving your large order in future.
04 What’s your delivery time?
After receiving your payment, we start to produce your order. It usually takes about 15-45 days depending on the products you order.
05 How do you control your quality?
To guarantee high quality and efficient management, we have passed ISO9001 quality management system certificate. All of our products are 100% inspected before shipment. Our whole manufacturing processes are under a very serious and strict system in our company.
06 What’s your product warranty?
The warranty time of the machine is 1 year. During this period, we will send you the replacement for the broken part(not man made).
To meet the every demand of customer is our goal. We are standing by for any question of customer. We try to make our service fast, efficient and satisfied.
07 What’s your company mainly exporting market?
We mainly export to European, North American, Australia, English and Southeast Asia Market. Because of good quality and service, we have establish good and long business relations with many clients. Welcome clients from all over the world to visit our factor

Type: Firewood Processor
Power Source: Gasoline/Pto/Electric
Certification: CE
Splitting Force: 12/20/27ton
Cutting Diameter: 380mm
Cutting Length: 550mm
US$ 3400/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

Shaft Collar

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.


A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China wholesaler Cheap Hydraulic 27ton Gasoline/Pto Wood Firewood Processor with Saw and Splitting   comer pto shaftChina wholesaler Cheap Hydraulic 27ton Gasoline/Pto Wood Firewood Processor with Saw and Splitting   comer pto shaft
editor by CX 2023-04-22